4 Signs You Need Pool Resurfacing
Posted on: 9 April 2021
Due to exposure to extreme weather elements and normal wear and tear, your swimming pool may develop cracks and dents that can affect its functionality and structural integrity. Therefore, it is important to respond quickly to solve the issues at an early stage. Resurfacing is one of the ways to solve the problems and salvage your pool. The following are four signs you need pool resurfacing.
1. Rough Surface
A newly constructed pool is usually smooth and comfortable, and you can walk around without getting injured. However, over time, the chemicals you use to treat your pool and continuous use tend to weaken the surface, making it rough. The roughness may also be caused by the accumulation of calcium deposits on the surface.
In such instances, some people usually opt to acid wash and polish the pool. However, this solution is temporary because the roughness will reoccur after some time. Therefore, it is best to call a pool resurfacing contractor to help you fix the problem.
2. Peeling plaster
If the plaster on your pool's floor or stairs is peeling, you need to get pool resurfacing services. This issue is referred to as spalling, and it usually occurs when pool water has a low pH or calcium levels.
Due to the imbalance, calcium hydroxide will dissolve into the pool surface, affecting its texture and appearance. A slight peel can be solved by patching, but it is advisable to resurface your entire pool if you have significant damage.
3. Discoloring Plaster
Prolonged reactions between the chemicals in pool water and plaster can cause plaster discoloration. In the pool industry, this problem is called pool mottling. It is more noticeable in darker plaster, which means you need to inspect your pool surface closely.
Mottling can also occur due to poor installation processes, specifically if too much calcium chloride was added to the plaster mix. If you notice discolored spots in your pool, you should get professional help to prevent further damage.
4. Cracks
Cracks in a pool can be small, generally referred to as craze cracks or big cracks that threaten the pool's structural integrity. The hydration of cement can cause these cracks, or if the pool was finished on a hot day and you took a long time to fill it. A professional can inject an epoxy or use steel staples on the craze cracks, but you will need to refinish your pool in the case of large cracks.
If your pool develops any of the discussed problems, you should be alerted. Pool resurfacing can save you from costly damages. Ensure you work with a reputable pool contractor with the relevant skills and experience for a pool resurfacing project.
Reach out to a pool resurfacing service in your area for more information.
Share